How to replace a Rack And Pinion Boot on Nissan Quest?

Loosen the lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the tie-rod end and jam nut. Take off the outer rack and pinion boot clamp by pinching the ends together with a pair of pliers, and cut off the inner boot clamp using diagonal cutters, then slide the boot off. Before installing the new boot, wrap the threads on the end of the inner tie-rod with tape to prevent cutting the small end of the new boot. Slide the new boot into position on the rack and pinion until it seats in the groove on the inner tie-rod and install new clamps. Remove the tape and install the tie-rod end. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.

Genuine Nissan Quest Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Rack and Pinion Boots found

View related parts
Nissan Quest Boot Kit-Power Steering Gear
Part Number: 48203-8J025
$18.81 MSRP: $24.70
You Save: $5.89 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Inner Tie Rod Boot, Tie Rod Boot
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2008 Nissan Quest | Base, S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Quest Boot Kit-Power Steering Gear
Part Number: 48203-CK025
$29.00 MSRP: $39.93
You Save: $10.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit-Power Steering Gear. This item subject to a 40% restocking fee if returned.; Boot, Tie Rod Boot
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2010 Nissan Quest | Base, S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Quest Boot Kit-Power Steering Gear
Part Number: 48204-CK025
$19.39 MSRP: $26.73
You Save: $7.34 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2010 Nissan Quest | Base, S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Quest Boot Kit Power Steering Gear
Part Number: D8204-1JB0A
$45.04 MSRP: $62.08
You Save: $17.04 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit-Power Steering Gear; Boot, Tie Rod Boot
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Quest | LE, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Quest Boot Kit Power Steering Gear
Part Number: D8203-1JB0A
$46.86 MSRP: $64.60
You Save: $17.74 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit-Power Steering Gear; Boot, Tie Rod Boot
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Quest | LE, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Quest Boot-Dust,Hand Lever
Part Number: 34122-7B000
Product Specifications
- Other Name: Boot
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1999-2003 Nissan Quest | GXE, SE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Quest Boot Kit-Power Steering Gear
Part Number: 48203-0B025
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Replaces: 48203-0B000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-2003 Nissan Quest | GXE, SE, XE | 6 Cyl 3.0L, 6 Cyl 3.3L | VG30E, VG33E

Nissan Quest Rack and Pinion Boot

The Nissan Quest Rack and Pinion Boot is a rubber bellows that seals each end of the steering rack. It protects the internal rack and pinion gears from dirt and debris as well as loss of fluid. The Rack and Pinion Boot is situated over the tie-rod connection at a spot where the rack gear exits the metal tube. It flexes when the rack moves from side to side as the steering wheel turns. It does this while creating a continuous barrier that does not interfere with the motion. The Rack and Pinion Boot in the Nissan steering rack assembly maintains hydraulic pressure and facilitates smooth power assist by preventing contamination from entering the gears, piston, and O-ring seals. When the Rack and Pinion Boot cracks or tears, foreign particles can penetrate the component and destroy the seal. Subsequently, it would see leaks occur and accelerate wear at the inner tie-rod joint. This would cause stiff steering, play at the wheel center, and ultimately damage to the rack. A sound Rack and Pinion Boot is therefore essential equipment on any Nissan Quest vehicle that ensures dependable steering response on every Quest while helping to avoid costly rack replacement on the Nissan Quest.

If you need any OEM Nissan Quest Rack and Pinion Boot, feel free to choose them out of our huge selection of genuine Nissan Quest Rack and Pinion Boot. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Quest Rack and Pinion Boot Parts Questions & Experts Answers

Boot Kit-Power Steering Gear
48203-0B025
Q: How to replace a Rack And Pinion Boot on Nissan Quest?
A:
Loosen the lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the tie-rod end and jam nut. Take off the outer rack and pinion boot clamp by pinching the ends together with a pair of pliers, and cut off the inner boot clamp using diagonal cutters, then slide the boot off. Before installing the new boot, wrap the threads on the end of the inner tie-rod with tape to prevent cutting the small end of the new boot. Slide the new boot into position on the rack and pinion until it seats in the groove on the inner tie-rod and install new clamps. Remove the tape and install the tie-rod end. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.