What is the location and procedure for removing and installing the CKP sensor on Nissan Rogue?

The CKP sensor is mounted on the back side of the cylinder block near the transaxle end of the engine, just below the starter. If equipped, remove the CKP sensor heat shield attaching bolt and remove the shield. Disconnect the electrical connector from the CKP sensor. Remove the mounting bolt from the CKP sensor and extract the sensor from the engine block (CKP sensor mounting bolt). Before installation, check the O-ring for cracks or tears and replace it if necessary. Installation is the reverse of removal.

Genuine Nissan Rogue Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Crankshaft Position Sensors found

View related parts
Nissan Rogue Engine Camshaft Position Sensor
Part Number: 23731-JA11B
$94.96 MSRP: $134.95
You Save: $39.99 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor; Camshaft Position Sensor, Camshaft Sensor
- Manufacturer Note: F/CAM
- Replaces: 23731-JA11A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2020 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-JA00C
$101.95 MSRP: $144.90
You Save: $42.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assy-Magnet; Crankshaft Sensor, Sensor
- Replaces: 23731-JA00A, 23731-JA00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2020 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-1VA0A
$80.13 MSRP: $113.88
You Save: $33.75 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor, Crankshaft Sensor
- Manufacturer Note: POS
- Replaces: 23731-EN20A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Rogue | SL, SV | 4 Cyl 2.0L | MR20DD
View related parts
Nissan Rogue Magnet Sensor Assembly
Part Number: 23731-JA00A
$101.95 MSRP: $144.90
You Save: $42.95 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assy-Magnet
- Manufacturer Note: CRANK SENSOR
- Replaced by: 23731-JA00C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2011 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-JA00B
$101.95 MSRP: $144.90
You Save: $42.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: CRANK SENSOR
- Replaced by: 23731-JA00C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2017 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-JA11C
$124.66 MSRP: $177.17
You Save: $52.51 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor, Camshaft Sensor
- Replaced by: 23731-JA11D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue CRANKSHAFT POSITION SENSOR
Part Number: 23731-6RC3A
$18.16 MSRP: $26.77
You Save: $8.61 (33%)
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Replaces: 23731-6RC0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2023 Nissan Rogue | Midnight Edition, Platinum, S, SL, SV | 3 Cyl 1.5 L GAS
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-JA00E
$103.05 MSRP: $146.47
You Save: $43.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021 Nissan Rogue | Platinum, S, SL, SV | 4 Cyl 2.5 L GAS
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-6CA0B
$73.51 MSRP: $104.48
You Save: $30.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Replaces: 23731-6CA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021 Nissan Rogue | Platinum, S, SL, SV | 4 Cyl 2.5 L GAS
View related parts
Nissan Rogue Crankshaft Position Sensor
Part Number: 23731-4BB0A
$92.44 MSRP: $131.37
You Save: $38.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Rogue | SL, SV | 4 Cyl 2.0L | MR20DD

Nissan Rogue Crankshaft Position Sensor

If you need any OEM Nissan Rogue Crankshaft Position Sensor, feel free to choose them out of our huge selection of genuine Nissan Rogue Crankshaft Position Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Rogue Crankshaft Position Sensor Parts Questions & Experts Answers

Magnet Sensor Assembly
23731-JA00A
Q: What is the location and procedure for removing and installing the CKP sensor on Nissan Rogue?
A:
The CKP sensor is mounted on the back side of the cylinder block near the transaxle end of the engine, just below the starter. If equipped, remove the CKP sensor heat shield attaching bolt and remove the shield. Disconnect the electrical connector from the CKP sensor. Remove the mounting bolt from the CKP sensor and extract the sensor from the engine block (CKP sensor mounting bolt). Before installation, check the O-ring for cracks or tears and replace it if necessary. Installation is the reverse of removal.

Related Nissan Rogue Parts

Browse by Year