Nissan E6210-5HA0B Rear Shock Absorber Kit

Turn the rear wheel lug nuts counterclockwise to loosen them, then safely lift the rear end of the vehicle and securely support it with jackstands While block the front wheels so that they can not move around. Lift the rear wheel and hold one end of the lower rear control arm using a floor jack placed at the coil spring pocket. Then, undo the nut and bolt of shock absorber upper mounting; in the same manner as above replace the nut and bolt of shock absorber lower mounting to take out the shock absorber. For installation, reverse the removal procedure, with a specific addition of raising the control arm with the jack to the normal ride height as you tighten the mounting fasteners to the recommended torque. Last, reconnect the wheel, and lug nuts, then raise the car and tighten the lug nuts to the right torque.