Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Nissan A2010-7B061 Piston W/PIN

1998-2001 Nissan A20107B061

Customer Questions & Expert Answers (10)
A2010-7B061 Nissan Piston W/PIN Illustration 1 of 1
A2010-7B061 Nissan Piston W/PIN Illustration 1 of 1
  • Part Description
    Piston-W/Pin
  • Lookup Code
    12010
  • Replaced By
    A2010-5S662
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • A2010-7B061 Piston W/PIN is Lookup Code 12010 in the diagram below

    2000 Nissan Xterra Piston W/PIN Diagram for A2010-7B061
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code12010
    Manufacturer Part NumberA2010-7B061
    Part DescriptionPiston-W/Pin
    Manufacturer NoteSTD GRADE 1
    Item Dimensions3.8 x 3.8 x 3.4 inches
    Item Weight1.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKUA2010-7B061
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2001 Nissan FrontierSE, XE|6 Cyl 3.3LVG33E
    1999-2001 Nissan QuestGXE, SE|6 Cyl 3.3LVG33E
    2000-2001 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by NissanPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if A2010-7B061 fits your vehicle.
    Posted by NissanPartsDeal Specialist
    Q:
    How can you protect the crankshaft journal and cylinder wall during piston removal for the 2000 Nissan Quest? Posted by Customer
    A:
    Slip a short length of plastic or rubber hose over each connecting rod cap bolt.
    Posted by NissanPartsDeal Specialist
    See expert answers on similar Piston
    Q:
    How is piston ring side clearance measured for the 1997 Nissan Quest? Posted by Customer
    A:
    The piston ring side clearance is measured using a feeler gauge at several points around each groove, ensuring the correct ring is used for each groove.
    Posted by NissanPartsDeal Specialist
    Q:
    What is the first step in preparing the connecting rod for installation for the 1994 Nissan Quest? Posted by Customer
    A:
    Remove the cap from the number one connecting rod, taking care to note the marks made during removal, and clean the bearing surfaces with a lint-free cloth.
    Posted by NissanPartsDeal Specialist
    Q:
    What components should be removed prior to removing the piston/connecting rod assemblies for the 2004 Nissan Xterra? Posted by Customer
    A:
    The cylinder heads, the oil pan, the windage tray (3.5L engine only), and the oil pump pick-up.
    Posted by NissanPartsDeal Specialist
    See expert answers on similar Piston
    Q:
    What should be applied to the bearing faces before reinstalling the rod cap for the 2002 Nissan Xterra? Posted by Customer
    A:
    Before reinstalling the rod cap, a clean moly-base grease or engine assembly lube should be applied to the bearing faces.
    Posted by NissanPartsDeal Specialist
    Q:
    How should the connecting rod cap nuts be loosened for the 1998 Nissan Frontier? Posted by Customer
    A:
    Loosen each of the connecting rod cap nuts 1/2-turn at a time until they can be removed by hand.
    Posted by NissanPartsDeal Specialist
    Q:
    Why is it vital to measure piston ring side clearance and piston-to-bore clearance for the 2003 Nissan Xterra? Posted by Customer
    A:
    Measuring piston ring side clearance and piston-to-bore clearance is vital to ensure that the piston rings and pistons fit correctly within the cylinder bore, preventing excessive wear and oil consumption.
    Posted by NissanPartsDeal Specialist
    Q:
    What lubrication steps should be taken before installing the piston and rings for the 1999 Nissan Frontier? Posted by Customer
    A:
    Before installing the piston and rings, the piston and rings should be lubricated with clean engine oil.
    Posted by NissanPartsDeal Specialist
    See expert answers on similar Piston
    Q:
    What is the recommended method for cleaning carbon deposits on the piston tops for the 2003 Nissan Frontier? Posted by Customer
    A:
    Carbon deposits on the piston tops should be scraped off, and further cleaning can be done using a hand-held brass wire brush or fine emery cloth with solvent. Avoid using a wire brush mounted in a drill motor, as it may erode the soft piston material.
    Posted by NissanPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part A2010-7B061, the Right Choice

To ensure reliability, purchase Nissan part # A2010-7B061 Piston W/PIN. It can be referred to as Piston. The first option would be to use OEM parts. Designed by Nissan manufacturer and are produced with stringent factory specifications, undergoing the quality control procedures. This part fits 1998-2001 Frontier, 1999-2001 Quest, 2000-2001 Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories, such as A20107B061 Piston W/PIN. Welcome to our vast selection of competitively priced genuine Nissan parts available online. We provide each OEM part with a manufacturer's warranty and a straightforward return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly