×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Nissan Parts
- Nissan Accessories
My Garage
My Account
Cart
Genuine Nissan 350Z Pinion Bearing
Transmission Pinion Bearing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Pinion Bearings found
Nissan 350Z Bearing-Differential Side
Part Number: 38440-0C000$97.83 MSRP: $126.78You Save: $28.95 (23%)Ships in 1-2 Business Days
Nissan 350Z Bearing-Drive Pinion,Rear
Part Number: 38120-0C000$109.95 MSRP: $155.30You Save: $45.35 (30%)Ships in 1-2 Business Days
Nissan 350Z Bearing-PINION
Part Number: 38140-0C00A$83.25 MSRP: $111.98You Save: $28.73 (26%)Ships in 1-2 Business Days
Nissan 350Z Bearing-Drive Pinion,Front
Part Number: 38140-0C000$83.25 MSRP: $111.98You Save: $28.73 (26%)Ships in 1-2 Business Days
Nissan 350Z Bearing-Drive PINION, Rear
Part Number: 38120-EC000$109.95 MSRP: $155.30You Save: $45.35 (30%)Ships in 1-2 Business Days
Nissan 350Z Pinion Bearing
The differential pinion gear of the Nissan 350Z is engaged by the Pinion Bearing, enabling torque to transfer efficiently to the rear wheels while also blocking noise that may otherwise cause damage. All Nissan 350Z performance coupes utilize a Pinion Bearing located at the front of the rear differential, which supports the thin oil-backed gear on a thin layer of oil that enables it to spin freely during acceleration and cornering. A well-functioning Pinion Bearing can help keep both open and viscous limited slip units fitted to the 350Z range quiet as it stops harsh metal contact that would normally produce a humming or grinding noise. Base trims of the early 350Z featured an open differential. A viscous limited slip design was included on the sport-oriented versions. However, each setup uses the same tapered roller Pinion Bearing. This keeps the gear in correct alignment under load. When the level of lubrication falls too low, the Pinion Bearing could overheat, wear rapidly, and allow gear wobble, which could cause mid-range whining that gets louder with road speed. Failing to heed that noise can damage the ring gear teeth and increase stress on driveline components. So maintaining the right fluid levels and the correct preload during reassembly will aid in the protection of long-term performance. The Nissan 350Z was produced from 2002 to 2009. It inherited the series tradition of long hoods and fastback profiles. It was powered by the VQ35DE and later the VQ35HR engine. Spanning from the base version to the performance variant, special anniversary editions, and roadster models, the Nissan 350Z had stronger power with sharper handling. The reliable Nissan Pinion Bearing is essential to a smooth run in the Nissan 350Z range of vehicles. It contributes to better acceleration and drivetrain efficiency while keeping you safe.
If you need any OEM Nissan 350Z Pinion Bearing, feel free to choose them out of our huge selection of genuine Nissan 350Z Pinion Bearing. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
