How to properly inspect, clean, and reassemble the cylinder head, including the exhaust valve and intake valve, during an engine overhaul on the Nissan Juke?

Begin by scraping away all traces of old gasket material from the cylinder head, followed by removing carbon from the combustion chambers and ports, and washing the cylinder head thoroughly with paraffin or a suitable solvent. Next, scrape off any heavy carbon deposits from the valves and use a power-operated wire brush to clean the valve heads and stems. Carefully inspect the cylinder head for cracks, coolant leakage, and other damage; if significant defects are found, a new cylinder head should be obtained. Check for distortion of the cylinder head gasket surface using a straight-edge and feeler blade, and if distortion exceeds specified limits, consult an engine reconditioning specialist regarding machining options. Examine the valve seats in each combustion chamber; severely damaged seats will need renewal or recutting, while slightly pitted seats can be ground-in with fine valve-grinding compound. Assess valve guides for wear by inserting the relevant valve and checking for excessive side-to-side motion; if movement is excessive, measure the valve stem diameter and renew the valve if worn, or renew the valve guide if the stem is not worn. If valve guides are renewed, recut or reground the valve seats afterward. Inspect each valve head for pitting, burning, cracks, and wear, and check the valve stem for scoring and wear ridges; renew any valve showing signs of damage. Measure the valve stem diameter at several points using a micrometer; significant differences indicate wear, necessitating renewal of the valve(s). If valves are satisfactory, grind them into their respective seats for a smooth, gas-tight seal, using fine grinding compound unless the seat is badly burned or deeply pitted, in which case a specialist should inspect the components. Perform valve grinding with the head supported upside-down, applying valve-grinding compound to the seat face and using a suction grinding tool on the valve head, lifting the valve occasionally to redistribute the compound. If coarse grinding compound is used, work until a dull, even surface is achieved, then switch to fine compound until a smooth finish is produced. After grinding, wash off all traces of compound with paraffin or a suitable solvent before reassembling the cylinder head. Examine valve springs for damage and discoloration, noting that checking their condition accurately requires special equipment; however, a rough assessment can be made by comparing the free length of the springs with a new one. Stand each spring on a flat surface and position a square alongside it. If any springs are damaged, distorted, or have lost tension, obtain a complete new set, as it is standard practice to renew valve springs during major overhauls. Additionally, renew the valve stem oil seals regardless of their apparent condition.

Genuine Nissan Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

106 Intake Valves found

View related parts
Nissan Valve Intake
Part Number: 13201-VJ200
$11.96 MSRP: $16.48
You Save: $4.52 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve, Valves
- Replaces: 13201-9E000
Fits the following Nissan Models:
- Altima | 1998-2000 | GLE, GXE, SE, XE | 4 Cyl 2.4L
- Frontier | 1998-2004 | SE, STD, XE | 4 Cyl 2.4L
- Xterra | 2000-2004 | XE | 4 Cyl 2.4L
View More
View related parts
Nissan Valve Intake
Part Number: 13201-4W001
$31.06 MSRP: $42.82
You Save: $11.76 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-4W000
Fits the following Nissan Models:
- 350Z | 2003-2007 | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L
- Altima | 2002-2004 | SE | 6 Cyl 3.5L
- Maxima | 2001-2003 | GLE, GXEL, SEL, SES | 6 Cyl 3.5L
- Murano | 2003-2007 | S, SE, SL | 6 Cyl 3.5L
- Pathfinder | 2000-2004 | LE, SE, XE | 6 Cyl 3.5L
View More
View related parts
Nissan Valve Intake
Part Number: 13201-6KA0A
$15.78 MSRP: $19.95
You Save: $4.17 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Manufacturer Note: INTAKE
- Replaced by: 13201-6KA0B
Fits the following Nissan Models:
- Pathfinder | 2016-2019 | Platinum, S, SL, SV | 6 Cyl 3.5L
View related parts
Nissan Valve Intake
Part Number: 13201-JG30C
$21.31 MSRP: $29.38
You Save: $8.07 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-JG30B, 13201-JG30A
Fits the following Nissan Models:
- Rogue | 2008-2015 | S, SL, SV | 4 Cyl 2.5L
View related parts
Nissan Intake Valve
Part Number: 13201-3RC0A
$12.15 MSRP: $16.75
You Save: $4.60 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Manufacturer Note: INT
Fits the following Nissan Models:
- Sentra | 2013-2019 | FE, S, SL, SR, SV | 4 Cyl 1.8L
View related parts
Nissan Valve Intake
Part Number: 13201-5JJ0A
$11.17 MSRP: $14.13
You Save: $2.96 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Replaces: 13201-3TA2A, 13201-3KY0A, 13201-3TA0A
Fits the following Nissan Models:
- Altima | 2013-2018 | 25SL/Moon Roof, Base, Entry, S, S PDS, SL, SR, SV, SV Navigation, Tech | 4 Cyl 2.5L
- Murano | 2016-2017 | Platinum, SL, SV | 4 Cyl 2.5L
- Pathfinder | 2014 | Platinum, SL, SV | 4 Cyl 2.5L
- Rogue | 2014-2020 | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-JK20B
$31.06 MSRP: $42.82
You Save: $11.76 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-JK20A
Fits the following Nissan Models:
- 350Z | 2006-2008 | 350Z, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L
- Murano | 2008-2014 | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L
- Quest | 2011-2014 | LE, S, SL, SV | 6 Cyl 3.5L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-EZ30A
$36.06 MSRP: $49.72
You Save: $13.66 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaced by: 13201-EZ32A
Fits the following Nissan Models:
- Armada | 2017-2019 | Platinum, Platinum CP, SL, SV | 8 Cyl 5.6L
- NV | 2017-2019 | S, S/Power, SL, SV | 8 Cyl 5.6L
- Titan | 2016-2019 | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-BV81B
$20.09 MSRP: $27.70
You Save: $7.61 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-BV81A
Fits the following Nissan Models:
- Juke | 2014-2017 | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L
- Sentra | 2016-2019 | Nismo, SR | 4 Cyl 1.6L
View related parts
Nissan Valve Intake
Part Number: 13201-53F02
$21.27 MSRP: $29.32
You Save: $8.05 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve, Valves
- Replaces: 13201-53F01
Fits the following Nissan Models:
- 240SX | 1990-1998 | SE, STD | 4 Cyl 2.4L
- Altima | 1993-1997 | GLE, GXE, SE, XE | 4 Cyl 2.4L
- Stanza | 1993-1997 | GLE, GXE, SE, XE | 4 Cyl 2.4L
View More
View related parts
Nissan Valve Intake
Part Number: 13201-3Z00A
$8.28 MSRP: $11.42
You Save: $3.14 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-3Z001, 13201-3Z000
Fits the following Nissan Models:
- Altima | 2002-2006 | Base, S, SL | 4 Cyl 2.5L
- Frontier | 2005-2019 | S, SE, SV, XE | 4 Cyl 2.5L
- Sentra | 2001-2006 | 2.5S, LE, SE-R, SE-R Spec V | 4 Cyl 2.5L
View More
View related parts
Nissan Valve Intake
Part Number: 13201-9HP0A
$10.77 MSRP: $14.85
You Save: $4.08 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
Fits the following Nissan Models:
- Altima | 2013-2018 | S, SE, SL, SR, SV, Tech | 6 Cyl 3.5L
- Maxima | 2016-2023, 2013-2014 | 40th Anniversary Edition, LE, Platinum, Platinum Reserve, Premium, S, SL, SR, SV, Sport | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
- Murano | 2015-2024 | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
- Pathfinder | 2013-2017 | Platinum, S, SL, SV | 6 Cyl 3.5L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-5RB0A
$24.83 MSRP: $31.40
You Save: $6.57 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-3HC0A, 13201-3AA0B, 13201-1KT0A
Fits the following Nissan Models:
- Kicks | 2018-2024 | S, SR, SR PLUS, SV | 4 Cyl 1.6 L GAS, 4 Cyl 1.6L
- Versa | 2012-2024 | 1.6 S, 1.6 S Plus, 1.6 SL, 1.6 SV, Base, S, S Plus, SL, SR, SV | 4 Cyl 1.6 L GAS, 4 Cyl 1.6L
- Versa Note | 2014-2019 | S, SL/Mid, SR, SV | 4 Cyl 1.6L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-6LB0A
$14.12 MSRP: $19.47
You Save: $5.35 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
Fits the following Nissan Models:
- Sentra | 2020-2024 | S, SR, SV | 4 Cyl 2.0 L GAS
View related parts
Nissan Intake Valve
Part Number: 13201-5NA0A
$19.79 MSRP: $27.28
You Save: $7.49 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaced by: 13201-6RS1A
Fits the following Nissan Models:
- Altima | 2019-2022 | Edition ONE, Platinum, SR | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
- Rogue | 2021 | Platinum, S, SL, SV
View related parts
Nissan Valve Intake
Part Number: 13202-EN20D
$31.89 MSRP: $43.97
You Save: $12.08 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Exhaust; Exhaust Valve
- Replaces: 13202-EN20C
Fits the following Nissan Models:
- Cube | 2010-2014 | 18, S, SL | 4 Cyl 1.8L
- NV | 2013-2021 | S, STD, SV, Taxi | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
- Versa | 2012 | S, SL | 4 Cyl 1.8L
View More
View related parts
Nissan Intake Valve
Part Number: 13201-9BM0A
$10.23 MSRP: $14.10
You Save: $3.87 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
Fits the following Nissan Models:
- Frontier | 2016-2019 | PRO-4X, S, SL, SV | 6 Cyl 4.0L
View related parts
Nissan Intake Valve
Part Number: 13201-9BT0A
$11.27 MSRP: $15.53
You Save: $4.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
Fits the following Nissan Models:
- Frontier | 2020-2024 | Hardbody Edition, PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Intake Valve
Part Number: 13201-1VA1A
$21.67 MSRP: $29.87
You Save: $8.20 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
Fits the following Nissan Models:
- Rogue | 2017-2019 | SL, SV | 4 Cyl 2.0L
- Rogue Sport | 2017-2022 | S, SL, SV | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
View related parts
Nissan Valve Intake
Part Number: 13201-9FP0A
$8.72 MSRP: $11.03
You Save: $2.31 (21%)
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Manufacturer Note: STD FUEL
Fits the following Nissan Models:
- Armada | 2013-2015 | LE, LE/SL, Platinum, SE, SE/SV | 8 Cyl 5.6L
- Frontier | 2013-2019 | PRO-4X, S, SL, SV | 6 Cyl 4.0L
- NV | 2013-2021 | S, S/Airbags, S/PWRABG, S/Power, SL, SV, SV/Airbags | 6 Cyl 4.0 L GAS, 6 Cyl 4.0L, 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
- Titan | 2013-2015 | PRO-4X, S, SL, SV | 8 Cyl 5.6L
- Xterra | 2013-2015 | Base Camp, Off-Road, PRO-4X, S, X | 6 Cyl 4.0L
View More

| Page 1 of 6 |Next >

1-20 of 106 Results

Nissan Intake Valve Parts Questions & Experts Answers

Valve Intake
13201-1KC0A
Q: How to properly inspect, clean, and reassemble the cylinder head, including the exhaust valve and intake valve, during an engine overhaul on the Nissan Juke?
A:
Begin by scraping away all traces of old gasket material from the cylinder head, followed by removing carbon from the combustion chambers and ports, and washing the cylinder head thoroughly with paraffin or a suitable solvent. Next, scrape off any heavy carbon deposits from the valves and use a power-operated wire brush to clean the valve heads and stems. Carefully inspect the cylinder head for cracks, coolant leakage, and other damage; if significant defects are found, a new cylinder head should be obtained. Check for distortion of the cylinder head gasket surface using a straight-edge and feeler blade, and if distortion exceeds specified limits, consult an engine reconditioning specialist regarding machining options. Examine the valve seats in each combustion chamber; severely damaged seats will need renewal or recutting, while slightly pitted seats can be ground-in with fine valve-grinding compound. Assess valve guides for wear by inserting the relevant valve and checking for excessive side-to-side motion; if movement is excessive, measure the valve stem diameter and renew the valve if worn, or renew the valve guide if the stem is not worn. If valve guides are renewed, recut or reground the valve seats afterward. Inspect each valve head for pitting, burning, cracks, and wear, and check the valve stem for scoring and wear ridges; renew any valve showing signs of damage. Measure the valve stem diameter at several points using a micrometer; significant differences indicate wear, necessitating renewal of the valve(s). If valves are satisfactory, grind them into their respective seats for a smooth, gas-tight seal, using fine grinding compound unless the seat is badly burned or deeply pitted, in which case a specialist should inspect the components. Perform valve grinding with the head supported upside-down, applying valve-grinding compound to the seat face and using a suction grinding tool on the valve head, lifting the valve occasionally to redistribute the compound. If coarse grinding compound is used, work until a dull, even surface is achieved, then switch to fine compound until a smooth finish is produced. After grinding, wash off all traces of compound with paraffin or a suitable solvent before reassembling the cylinder head. Examine valve springs for damage and discoloration, noting that checking their condition accurately requires special equipment; however, a rough assessment can be made by comparing the free length of the springs with a new one. Stand each spring on a flat surface and position a square alongside it. If any springs are damaged, distorted, or have lost tension, obtain a complete new set, as it is standard practice to renew valve springs during major overhauls. Additionally, renew the valve stem oil seals regardless of their apparent condition.