Where is the Camshaft Position Sensor located and How to remove and install it on Nissan Versa?

There is also placed the CMP sensor on the top of the engine on the right side of the driver. To remove it, first, you need to disconnect the CMP sensor's electrical connector. After that, pull out the mounting bolt and extract the sensor. To uninstall it, on the other hand, you need to perform the exact opposite of what has been described above.

Genuine Nissan Versa Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Nissan Versa Camshaft Position Sensor
Part Number: 23731-EN22A
$103.02 MSRP: $149.20
You Save: $46.18 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Phase
- Replaced by: 23731-3LM1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2012 Nissan Versa | S, SL | 4 Cyl 1.8L | MR18DE
View related parts
Nissan Versa Camshaft Position Sensor
Part Number: 23731-ED02A
$104.02 MSRP: $150.65
You Save: $46.63 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 23731-ED03B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2015 Nissan Versa | Base, Entry, SL, SV | 4 Cyl 1.6L | HR16DE
View related parts
Nissan Versa Camshaft Position Sensor
Part Number: 23731-EN215
$103.02 MSRP: $149.20
You Save: $46.18 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Phase
- Replaced by: 23731-3LM1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2008 Nissan Versa | S, SL | 4 Cyl 1.8L | MR18DE
View related parts
Nissan Versa Camshaft Position Sensor
Part Number: 23731-3LM1B
$34.03 MSRP: $149.20
You Save: $115.17 (78%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Sensor
- Replaced by: 23731-3LM1C
- Replaces: 23731-3LM1A, 23731-EN215, 23731-EN22A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2025 Nissan Versa | 1.8 S, 1.8 SL, S, SL, SR, SV | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Nissan Versa Camshaft Position Sensor
Part Number: 23731-ED02C
$104.02 MSRP: $150.65
You Save: $46.63 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: F/CAM(NOT ADOPT)
- Replaced by: 23731-ED03B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014-2019 Nissan Versa | Base, SL, SV | 4 Cyl 1.6L | HR16DE

Nissan Versa Camshaft Position Sensor

The Nissan Versa Camshaft Position Sensor helps the engine control module time fuel injection and ignition through monitoring the position and speed of the camshaft. Through the provision of this data to the engine control module, this sensor allows the computer to pulse each fuel injector in the correct firing order so as to avoid engine stalling. The unit is usually a small electronic device that is fitted above the camshaft. However, on some Nissan Versa engines, it can be fitted behind the cylinder head or near the engine block wherever it can read camshaft movement. The Camshaft Position Sensor serves the purpose of matching the synchronization of the pistons and valves at start-up. It works with the crank sensor inside the vehicle. The Camshaft Position Sensor thus supports steady idle and smooth combustion. If the Camshaft Position Sensor is physically damaged, it may not send a signal. As the signal is required to calculate engine speed, rough running or a no-start condition may occur because the fuel will not be delivered accurately. To ensure reliable performance of the Nissan Versa engine, it is necessary to maintain the Camshaft Position Sensor in good condition. Nissan Versa vehicles rely on a sensor of this type for consistent power and dependable driving.

If you need any OEM Nissan Versa Camshaft Position Sensor, feel free to choose them out of our huge selection of genuine Nissan Versa Camshaft Position Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Versa Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor
23731-EN22A
Q: Where is the Camshaft Position Sensor located and How to remove and install it on Nissan Versa?
A:
There is also placed the CMP sensor on the top of the engine on the right side of the driver. To remove it, first, you need to disconnect the CMP sensor's electrical connector. After that, pull out the mounting bolt and extract the sensor. To uninstall it, on the other hand, you need to perform the exact opposite of what has been described above.

Related Nissan Versa Parts

Browse by Year