Nissan 55020-7Y001 Rear Suspension Spring

Loosen the rear wheel lug nuts, raise the rear of the vehicle, support it securely on jackstands, and remove the wheels. Position a floor jack under the lower rear suspension arm and raise it slightly. Mark the relationship of the adjusting cam to the center member, then remove the bolt for the rear lower suspension arm at the center member. Loosen the bolt and nut for the lower rear suspension arm at the knuckle. Carefully lower the suspension arm using the floor jack, angling it away from the center member for additional clearance. Remove the coil spring, the rubber mount, and the rubber seal. For installation, raise the lower suspension arm with a floor jack until it reaches normal ride height, then tighten the suspension arm bolt and nuts to the specified torque, ensuring the marks on the adjusting cam and the center member are aligned before tightening. Finally, tighten the wheel lug nuts to the specified torque.

Guide the brake hose through its bracket in the strut and install the retaining clip.