What is the function of the Neutral Safety Switch and How to remove and adjust it on Nissan 240sx?

When the transaxle shifts to the Reverse position the inhibitor switch activates both back-up lights functionality and the Neutral functionality needed to supply power to the starter in Neutral and Park positions. Vehicle support on jackstands enables the removal and installation process to begin with transaxle control cable and electrical harness detachment then screw removal from the switch after which the switch can be taken out. The installation process starts by following reverse steps of removal while adjustment requires support and lifting the vehicle to align the adjustment holes of the inhibitor switch with the switch lever through vertical positioning of the lever. Use a torque wrench to adjust the screws to 1.4-1.9 foot pounds while checking electrical measurement to make sure the vehicle engine operates only during Park or Neutral selection.

Genuine Nissan 240SX Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Neutral Safety Switches found

View related parts
Nissan 240SX Neutral Position Switch
Part Number: 32006-32G11
$28.57 MSRP: $39.38
You Save: $10.81 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Neutral
- Replaced by: 32006-32G2A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1995 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24D, KA24DE
View related parts
Nissan 240SX Neutral Position Switch
Part Number: 32006-32G22
$28.57 MSRP: $39.38
You Save: $10.81 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 32006-32G2A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Park/Neutral Position Switch
Part Number: 31918-42X02
$95.76 MSRP: $138.68
You Save: $42.92 (31%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly Inhibitor
- Replaced by: 31918-43X13
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1997 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Neutral Switch
Part Number: 32006-M8010
Product Specifications
- Other Name: Switch-Neutral ; Neutral Position Switch
- Replaced by: 32006-M8060
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX Neutral Position Switch
Part Number: 32006-K2411
Product Specifications
- Other Name: Switch Complete #4
- Replaced by: 32006-K2461
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1990 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX Neutral Safety Switch
Part Number: 31918-41X10
Product Specifications
- Other Name: Switch Assy-Inhibitor ; Park/Neutral Position Switch
- Replaced by: 31918-43X01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Neutral Safety Switch
Part Number: 31918-43X15
Product Specifications
- Other Name: Switch Assy-Inhibitor ; Park/Neutral Position Switch
- Replaces: 31918-41X75
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Neutral Safety Switch
Part Number: 31918-41X75
Product Specifications
- Other Name: Switch Assy-Inhibitor ; Park/Neutral Position Switch
- Replaced by: 31918-43X15
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1996 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE

Nissan 240SX Neutral Safety Switch

The Nissan 240SX Neutral Safety Switch exists to make sure the car only fires up when the shifter sits safely in neutral or park, keeping drivers and bystanders out of harm's way. Acting like a gatekeeper in the ignition pathway, this Neutral Safety Switch monitors the transmission's position and keeps the starter circuit open until the lever aligns with the designated safe slots, then closes the circuit to let the engine crank. Inside each 240SX, the Neutral Safety Switch works through an internal set of contacts that stay separated whenever the gear selector rests in drive or reverse, instantly halting electrical flow to the starter motor. Once neutral or park is chosen, modern Nissan owners will find this Neutral Safety Switch causes those contacts to touch, current flows, and the engine can turn over, making the system a simple yet effective safety backup. Across production years the design principle remains unchanged, because the task is straightforward and universally important, so drivers moving from an early 240SX to a later Nissan model will experience the same seamless operation from the Neutral Safety Switch every time they twist the key.

If you need any OEM Nissan 240SX Neutral Safety Switch, feel free to choose them out of our huge selection of genuine Nissan 240SX Neutral Safety Switch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 240SX Neutral Safety Switch Parts Questions & Experts Answers

Neutral Position Switch
32006-32G11
Q: What is the function of the Neutral Safety Switch and How to remove and adjust it on Nissan 240sx?
A:
When the transaxle shifts to the Reverse position the inhibitor switch activates both back-up lights functionality and the Neutral functionality needed to supply power to the starter in Neutral and Park positions. Vehicle support on jackstands enables the removal and installation process to begin with transaxle control cable and electrical harness detachment then screw removal from the switch after which the switch can be taken out. The installation process starts by following reverse steps of removal while adjustment requires support and lifting the vehicle to align the adjustment holes of the inhibitor switch with the switch lever through vertical positioning of the lever. Use a torque wrench to adjust the screws to 1.4-1.9 foot pounds while checking electrical measurement to make sure the vehicle engine operates only during Park or Neutral selection.