The Nissan Armada Transfer Case Seal holds lubricant inside the transfer gears to avoid losing fluid that would overheat and damage drivetrain components. The Transfer Case Seal forms a tight seal around the output shaft to hold oil, which allows the gears to turn in response to input from the transmission. This allows your four wheel drive to function reliably. Puddles under the case, loss of lubricant, rapid friction, and heat damage to the gears is what happens on seal failure. Over the generations, every Nissan Armada model has continued to use the same basic lip style Transfer Case Seal pressed into the housing, thus there are no design changes to compare, only gradual material updates. Fixing your integrity is straightforward but quite dirty business. Raise the SUV, unclip and label the driveshaft, pry out the old Transfer Case Seal from the bore, clean the bore, grease and evenly seat the new Transfer Case Seal, reconnect the shaft, and clip the clips. The factory fluid level is protected with prompt replacement to protect Nissan driveline components and help maintain the Armada's reputation for durability.
If you need any OEM Nissan Armada Transfer Case Seal, feel free to choose them out of our huge selection of genuine Nissan Armada Transfer Case Seal. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.