How do you remove and install the Manual steering gear assembly on Nissan 240sx?

To remove and install the steering gear assembly, first raise and support the car on jackstands. Use the Ball Joint Remover tool HT72520000 or an equivalent to detach the tie rod end from the steering knuckle. Loosen the steering gear mounting bolts without removing them, then match mark and remove the steering column lower joint. Unbolt and take out the steering gear assembly. For installation, position the steering gear assembly back onto the vehicle and torque the tie rod-to-steering knuckle nut according to specifications, which are 40-72 ft. lbs. for the 200SX model and 22-29 ft. lbs. for all Stanza models. Torque the steering gear-to-frame clamp bolts evenly in steps to 43-58 ft. lbs. for Stanza and 33-44 ft. lbs. for 200SX, and torque the lower joint-to-steering gear bolt to 23-31 ft. lbs. for all models. Ensure that the wheels are aligned straight and the steering joint slot is aligned with the steering gear cap or spacer mark when installing the lower steering joint. Check the front end alignment if necessary. For overhaul, it is advisable to have the manual steering gear serviced by qualified rebuilders, as the cost of specific components may not be as economical as purchasing a rebuilt unit.

Genuine Nissan 240SX Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Rack And Pinions found

View related parts
Nissan 240SX Pinion Assy-Power Steering
Part Number: 49220-53F00
Product Specifications
- Other Name: Pinion, Pinion Shaft
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Pinion Assy-Power Steering
Part Number: 49220-70F00
Product Specifications
- Other Name: Pinion, Pinion Valve
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Pinion Assy-Power Steering
Part Number: 49220-42F00
Product Specifications
- Other Name: Pinion, Pinion Valve
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX Rack Assy-Power Steering
Part Number: 49271-53F60
Product Specifications
- Other Name: Rack
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Pinion Assy-Power Steering
Part Number: 49220-53F60
Product Specifications
- Other Name: Pinion, Pinion Shaft
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Rack Power Steering
Part Number: 49271-40F06
Product Specifications
- Other Name: Rack Assy-Power Steering; Rack
- Replaces: 49271-40F00, 49271-40F07
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Rack Power Steering
Part Number: 49271-40F07
Product Specifications
- Other Name: Rack Assy-Power Steering
- Replaced by: 49271-40F06
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Rack Assy-Power Steering
Part Number: 49271-70F00
Product Specifications
- Other Name: Rack
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Cylinder Assy-Power,Hicas
Part Number: 55710-53F00
Product Specifications
- Other Name: Cylinder, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Gear-Power STER
Part Number: 49200-42F06
Product Specifications
- Other Name: Gear Assy-Power Steering; Gear Assembly, Steering Gear
- Replaces: 49200-42F07
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX Gear-Power STER
Part Number: 49200-42F07
Product Specifications
- Other Name: Gear Assy-Power Steering
- Replaced by: 49200-42F06
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX Gear Assy-Power Steering
Part Number: 49200-53F60
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Link Assembly-Lower, Rear Suspension, HICAS
Part Number: 55110-53F00
Product Specifications
- Other Name: Link Assy-Lower,Rear Suspension Hicas; Link Assembly, Steering Gear
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Gear Assy-Power Steering
Part Number: 49200-53F00
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Gear Assy-Power Steering
Part Number: 49200-70F00
Product Specifications
- Other Name: Gear, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Gear & Linkage-Power Steering
Part Number: 49001-70F00
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-70F01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Gear & Linkage-Power Steering
Part Number: 49001-53F60
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-53F61
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Gear & Linkage-Power Steering
Part Number: 49001-53F00
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-53F01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Gear & Linkage-Power Steering
Part Number: 49001-42F00
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-42F01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E

Nissan 240SX Rack And Pinion

If you need any OEM Nissan 240SX Rack And Pinion, feel free to choose them out of our huge selection of genuine Nissan 240SX Rack And Pinion. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 240SX Rack And Pinion Parts Questions & Experts Answers

Rack Assy-Power Steering
49271-53F60
Q: How do you remove and install the Manual steering gear assembly on Nissan 240sx?
A:
To remove and install the steering gear assembly, first raise and support the car on jackstands. Use the Ball Joint Remover tool HT72520000 or an equivalent to detach the Tie Rod End from the Steering Knuckle. Loosen the steering gear mounting bolts without removing them, then match mark and remove the steering column lower joint. Unbolt and take out the steering gear assembly. For installation, position the steering gear assembly back onto the vehicle and torque the tie rod-to-steering knuckle nut according to specifications, which are 40-72 ft. lbs. for the 200SX model and 22-29 ft. lbs. for all Stanza models. Torque the steering gear-to-frame clamp bolts evenly in steps to 43-58 ft. lbs. for Stanza and 33-44 ft. lbs. for 200SX, and torque the lower joint-to-steering gear bolt to 23-31 ft. lbs. for all models. Ensure that the wheels are aligned straight and the steering joint slot is aligned with the steering gear cap or spacer mark when installing the lower steering joint. Check the front end alignment if necessary. For overhaul, it is advisable to have the manual steering gear serviced by qualified rebuilders, as the cost of specific components may not be as economical as purchasing a rebuilt unit.