How to inspect and check the drive shaft on the Nissan 350Z?

Carry the car up and support it safely on stands. Crawl below the car, look at its drive shaft to see any dents in the tube or a crack visible on it. Any presence of these requires one to replace the entire drive shaft. Look for oil leaks at the front and rear end of the drive shafts. If there is leaking around where the driveshaft enters the transmission, then this means that there is an issue with the rear seal of the transmission; if there is leaking around where the driveshaft connects to differential; this may mean that your pinion seal is defective while if at all there is leaking around entrances into transfer case (AWD models) - your transfer cases' seals could be faulty. In addition to that, while under raise an assistant turn back wheel so that it would make a rotating motion of driveshaft. At this point ensure universal joints are not functioning properly by checking their free movement without making sound or being loose. Also in case a drive shaft does not move, you can test how universal joints are working by holding hands on either side of each coupling and twisting it cautiously. If it has just a little play on whichever side, then most likely it needs changing. Additionally, lifting upwards at any stage might reveal activity within them as well. Lastly, ensure that you have tightened up all your bolts which hold your drive shaft on both ends.

How to safely remove and install the drive shaft on a Nissan Murano?

Raise the rear of the vehicle and support it securely on jackstands while blocking the front wheels to prevent rolling. If concerned about a possibly bent driveshaft causing a vibration, mount a dial indicator to the floor of the vehicle and check the driveshaft runout in the middle of the front and rear sections. Turn the key On, shift the transaxle into Neutral, then turn the key Off and release the parking brake. Mark the relationship of the driveshaft flanges to the differential and transfer case flanges. Loosen the nuts of the center bearing brackets without removing them. Remove the flange bolts from each end of the driveshaft, immobilizing it by placing a large screwdriver into the U-joint while loosening the bolts, and insert a tool into the assembly to prevent it from turning as you break the nuts and bolts loose. Remove the center support bearing nuts and take out the driveshaft, followed by the removal of the center bearing bracket from the driveshaft. For installation, reverse the removal process, attaching the center bearing bracket with the arrow facing forward, aligning the match marks made earlier as you attach each end of the driveshaft, and tighten the nuts and bolts.

How to properly remove and install a drive shaft on the Nissan Rogue?

Raise the rear of the vehicle and support it securely on jackstands, blocking the front wheels to prevent rolling. If concerned about a possibly bent driveshaft causing a vibration, mount a dial indicator to the floor of the vehicle and check the driveshaft runout in the middle of the front and rear sections. Turn the key On, shift the transaxle into Neutral, then turn the key Off and release the parking brake. Mark the relationship of the driveshaft flanges to the differential and transfer case flanges. Loosen the nuts of the center bearing brackets without removing them. Remove the flange bolts from each end of the driveshaft, using a tool in the u-joint to prevent turning while breaking the nuts and bolts loose. Remove the center support bearing nuts and take out the driveshaft, followed by the center bearing bracket from the driveshaft. For installation, reverse the removal process, attaching the center bearing bracket with the arrow facing forward and aligning the match marks made earlier as each end of the driveshaft is attached, then tighten the nuts and bolts to the specified torque values.

Genuine Nissan Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

428 Drive Shafts found

View related parts
Nissan Propeller Shaft
Part Number: 37200-ZZ70A
$439.50 MSRP: $620.77
You Save: $181.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Front; Drive Shaft, Drive Shaft Assembly
- Replaces: 37200-ZP90A, 37200-7S110, 37200-7S100, 37200-ZE20A
Fits the following Nissan Models:
- Armada | 2004-2015 | LE, LE/SL, Platinum, SE, SE/SV | 8 Cyl 5.6L
- Frontier | 2005-2025 | Desert Runner, Hardbody Edition, LE, Nismo Off-Road, Off-Road, PRO-4X, PRO-X, S, SE, SL, SV, XE | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L
- Pathfinder | 2005-2012 | LE, S, SE, SE Off-Road, SV, Silver Edition, XE | 6 Cyl 4.0L, 8 Cyl 5.6L
- Titan | 2004-2015 | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L
- Xterra | 2005-2015 | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L
View More
View related parts
Nissan Propeller Shaft
Part Number: 37200-EZ20A
$580.18 MSRP: $819.47
You Save: $239.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Front; Drive Shaft
Fits the following Nissan Models:
- Titan | 2016-2024 | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
View related parts
Nissan Propeller Shaft
Part Number: 37200-JF02A
$1528.03 MSRP: $1849.91
You Save: $321.88 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Front; Drive Shaft, Drive Shaft Assembly
- Replaces: 37200-JF00A, 37200-JF01A
Fits the following Nissan Models:
- GT-R | 2023-2024, 2009-2021 | 50th Anniversary Edition, Base, Black Edition, Nismo, NismoPKG, Premium, Pure, Skyline Edition, T-spec, T-spec Takumi Edition, Track, Track Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.8L
View related parts
Nissan Shaft Assembly Propeller
Part Number: 37000-JM13A
$834.38 MSRP: $1178.50
You Save: $344.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy; Drive Shaft
- Replaces: 37000-JM14A, 37000-JM100, 37000-JM10A
Fits the following Nissan Models:
- Rogue | 2008-2015 | S, SL, SV | 4 Cyl 2.5L
View related parts
Nissan PROPELLAR Shaft
Part Number: 37300-ZV20B
$704.38 MSRP: $994.88
You Save: $290.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Rear; Drive Shaft
- Replaces: 37300-ZV20A, 37300-ZJ40A
Fits the following Nissan Models:
- Titan | 2006-2015 | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L
View related parts
Nissan Shaft Rear PROPELLER
Part Number: 37300-ZL91A
$504.54 MSRP: $712.63
You Save: $208.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Rear; Drive Shaft
- Position: Rear
- Replaces: 37300-ZP81A, 37300-EA510
Fits the following Nissan Models:
- Pathfinder | 2005-2012 | S, SE, SE Off-Road, SV, Silver Edition, XE | 6 Cyl 4.0L
View related parts
Nissan Shaft Rear PROPELLER
Part Number: 37300-ZL82A
$655.66 MSRP: $926.07
You Save: $270.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Rear; Drive Shaft
- Position: Rear
- Replaces: 37300-EA115, 37300-ZP72A
Fits the following Nissan Models:
- Xterra | 2005-2015 | Base Camp, S, SE, X | 6 Cyl 4.0L
View related parts
Nissan Shaft Assembly
Part Number: 37300-ZZ71B
$516.01 MSRP: $728.83
You Save: $212.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Rear; Drive Shaft, Drive Shaft Assembly
- Replaces: 37300-ZP96A, 37300-EA305, 37300-ZZ71A
Fits the following Nissan Models:
- Frontier | 2005-2021 | Desert Runner, LE, Nismo Off-Road, Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L
View related parts
Nissan Propeller Shaft Assy
Part Number: 37000-4BA1A
$1444.46 MSRP: $1748.74
You Save: $304.28 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
Fits the following Nissan Models:
- Rogue | 2014-2019 | S, SL, SV, SV Premium | 4 Cyl 2.5L
View related parts
Nissan Shaft Rear PROPELLER
Part Number: C7300-6AV0A
$2934.42 MSRP: $3552.57
You Save: $618.15 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Rear; Drive Shaft, Drive Shaft Assembly
- Position: Rear
- Replaces: C7300-KB50A, C7300-JF00A
Fits the following Nissan Models:
- GT-R | 2023-2024, 2009-2021 | 50th Anniversary Edition, Base, Black Edition, Nismo, NismoPKG, Premium, Pure, Skyline Edition, T-spec, T-spec Takumi Edition, Track, Track Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.8L
View related parts
Nissan Propeller Shaft Assy
Part Number: 37000-4BA0A
$824.77 MSRP: $1164.93
You Save: $340.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
Fits the following Nissan Models:
- Rogue | 2014-2020 | S, SL, SL Hybrid, SL/Premium, SV, SV Hybrid, SV Premium | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5L
View related parts
Nissan Propeller Shaft Assy
Part Number: 37000-3JA2B
$907.80 MSRP: $1282.20
You Save: $374.40 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft
- Replaces: 37000-3JA2A
Fits the following Nissan Models:
- Pathfinder | 2013-2020 | Platinum, Platinum Hybrid, S, SL, SL Hybrid, SV, SV Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
View related parts
Nissan Shaft Assembly Propeller
Part Number: 37000-1LA0A
$1461.65 MSRP: $1769.56
You Save: $307.91 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy; Drive Shaft
Fits the following Nissan Models:
- Armada | 2017-2024 | Midnight Edition, Platinum, Platinum CP, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
View related parts
Nissan Shaft Rr PROPELLER
Part Number: 37300-9BT1A
$1679.32 MSRP: $2033.07
You Save: $353.75 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
- Position: Rear
Fits the following Nissan Models:
- Frontier | 2020-2022 | PRO-4X, S, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Propeller Shaft Assy-Rear
Part Number: 37300-9FV0B
$503.80 MSRP: $711.58
You Save: $207.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
- Position: Rear
Fits the following Nissan Models:
- Titan | 2020-2024 | PRO-4X, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS
View related parts
Nissan Propeller Shaft
Part Number: 37200-EZ00B
$971.84 MSRP: $1372.65
You Save: $400.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy-Front; Drive Shaft
Fits the following Nissan Models:
- Titan | 2016-2019 | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel
View related parts
Nissan Shaft Assembly Propeller
Part Number: 37000-5AA1B
$783.82 MSRP: $1107.08
You Save: $323.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy; Drive Shaft
- Replaces: 37000-5AA0A
Fits the following Nissan Models:
- Murano | 2015-2024 | Midnight Edition, Platinum, Platinum Hybrid, S, SL, SL Hybrid, SV | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
View related parts
Nissan Shaft Assembly Propeller
Part Number: 37000-ZL81B
$640.06 MSRP: $904.03
You Save: $263.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy; Drive Shaft
- Replaces: 37000-ZP71A, 37000-EA110, 37000-ZL81A
Fits the following Nissan Models:
- Xterra | 2005-2015 | Base Camp, Off-Road, S, SE, X | 6 Cyl 4.0L
View related parts
Nissan Shaft Assembly Propeller
Part Number: 37000-ZV01A
$905.32 MSRP: $1278.70
You Save: $373.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller Shaft Assy; Drive Shaft
- Replaces: 37000-ZR00B
Fits the following Nissan Models:
- Titan | 2007-2015 | LE, SE, SV, XE | 8 Cyl 5.6L
View related parts
Nissan Propeller Shaft Assy
Part Number: 37000-6MA0A
$1055.17 MSRP: $1490.35
You Save: $435.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
- Manufacturer Note: ID Label = E
- Replaces: 37000-4EF0B
Fits the following Nissan Models:
- Rogue Sport | 2017-2022 | S, SL, SV | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L

| Page 1 of 22 |Next >

1-20 of 428 Results

About Nissan Drive Shaft

Generally speaking, the function of driveshaft is to transmit the power produced by the engine to some part as it required. Specifically, for front wheel-drive, the power is transmitted to the front. Similarly, the rear for rear wheel-drive; for four wheel-drive, they have two driveshafts and send power to the front and rear. For your reminder, if you change the height of your Nissan car, there is a high possibility that the driveshaft gets damaged. What’s more, once you change your driveshaft, some related parts like U-joints, should be checked and lubricated as well. Here are some symptoms showing that your driveshaft may goes wrong: if you hear a clunking noise when you accelerate of shift between drive and reverse; if you feel a vibration when you are driving; if you hear a squeaking noise when you drive your Nissan, you are supposed to check it immediately. Once you decide to change your driveshaft, we are glad to offer you all Nissan genuine OEM driveshaft with a discounted price.

Nissan Drive Shaft Parts Questions & Experts Answers

Propeller Shaft Assembly
37000-CD100
Q: How to inspect and check the drive shaft on the Nissan 350Z?
A:
Carry the car up and support it safely on stands. Crawl below the car, look at its drive shaft to see any dents in the tube or a crack visible on it. Any presence of these requires one to replace the entire drive shaft. Look for oil leaks at the front and rear end of the drive shafts. If there is leaking around where the driveshaft enters the transmission, then this means that there is an issue with the rear seal of the transmission; if there is leaking around where the driveshaft connects to differential; this may mean that your pinion seal is defective while if at all there is leaking around entrances into transfer case (AWD models) - your transfer cases' seals could be faulty. In addition to that, while under raise an assistant turn back wheel so that it would make a rotating motion of driveshaft. At this point ensure universal joints are not functioning properly by checking their free movement without making sound or being loose. Also in case a drive shaft does not move, you can test how universal joints are working by holding hands on either side of each coupling and twisting it cautiously. If it has just a little play on whichever side, then most likely it needs changing. Additionally, lifting upwards at any stage might reveal activity within them as well. Lastly, ensure that you have tightened up all your bolts which hold your drive shaft on both ends.
Propeller Shaft Assembly
37000-1AA1A
Q: How to safely remove and install the drive shaft on a Nissan Murano?
A:
Raise the rear of the vehicle and support it securely on jackstands while blocking the front wheels to prevent rolling. If concerned about a possibly bent driveshaft causing a vibration, mount a dial indicator to the floor of the vehicle and check the driveshaft runout in the middle of the front and rear sections. Turn the key On, shift the transaxle into Neutral, then turn the key Off and release the parking brake. Mark the relationship of the driveshaft flanges to the differential and transfer case flanges. Loosen the nuts of the center bearing brackets without removing them. Remove the flange bolts from each end of the driveshaft, immobilizing it by placing a large screwdriver into the U-joint while loosening the bolts, and insert a tool into the assembly to prevent it from turning as you break the nuts and bolts loose. Remove the center support bearing nuts and take out the driveshaft, followed by the removal of the center bearing bracket from the driveshaft. For installation, reverse the removal process, attaching the center bearing bracket with the arrow facing forward, aligning the match marks made earlier as you attach each end of the driveshaft, and tighten the nuts and bolts.
Shaft Assembly Propeller
37000-JM13A
Q: How to properly remove and install a drive shaft on the Nissan Rogue?
A:
Raise the rear of the vehicle and support it securely on jackstands, blocking the front wheels to prevent rolling. If concerned about a possibly bent driveshaft causing a vibration, mount a dial indicator to the floor of the vehicle and check the driveshaft runout in the middle of the front and rear sections. Turn the key On, shift the transaxle into Neutral, then turn the key Off and release the parking brake. Mark the relationship of the driveshaft flanges to the differential and transfer case flanges. Loosen the nuts of the center bearing brackets without removing them. Remove the flange bolts from each end of the driveshaft, using a tool in the u-joint to prevent turning while breaking the nuts and bolts loose. Remove the center support bearing nuts and take out the driveshaft, followed by the center bearing bracket from the driveshaft. For installation, reverse the removal process, attaching the center bearing bracket with the arrow facing forward and aligning the match marks made earlier as each end of the driveshaft is attached, then tighten the nuts and bolts to the specified torque values.